Search

Browse Subject Areas

For Authors

Submit a Proposal

Deepwater Flexible Risers and Pipelines

By Yong Bai
Series: Advances in Pipes and Pipelines
Copyright: 2021   |   Status: Published
ISBN: 9781119322726  |  Hardcover  |  
606 pages
Price: $249 USD
Add To Cart

One Line Description
This second volume in the Advances in Pipes and Pipelines series focuses on flexible pipelines, risers, and umbilicals, offering the engineer the most up-to-date and comprehensive coverage of pipeline engineering available today.

Audience
Engineers, scientists, managers, designers, and students working with, researching, or studying pipeline design and implementation

Description
The technology, processes, materials, and theories surrounding pipeline construction, application, and troubleshooting are constantly changing, and this new series, Advances in Pipes and Pipelines,, has been created to meet the needs of engineers and scientists to keep them up to date and informed of all of these advances. This second volume in the series focuses on flexible pipelines, risers, and umbilicals, offering the engineer the most thorough coverage of the state-of-the-art available. The authors of this work have written numerous books and papers on these subjects and are some of the most influential authors on flexible pipes in the world, contributing much of the literature on this subject to the industry. This new volume is a presentation of some of the most cutting-edge technological advances in technical publishing.

The first volume in this series, published by Wiley-Scrivener, is Flexible Pipes, available at www.wiley.com. Laying the foundation for the series, it is a groundbreaking work, written by some of the world’s foremost authorities on pipes and pipelines. Continuing in this series, the editors have compiled the second volume, equally as groundbreaking, expanding the scope to pipelines, risers, and umbilicals.

This is the most comprehensive and in-depth series on pipelines, covering not just the various materials and their aspects that make them different, but every process that goes into their installation, operation, and design. This is the future of pipelines, and it is an important breakthrough. A must-have for the veteran engineer and student alike, this volume is an important new advancement in the energy industry, a strong link in the chain of the world’s energy production.


Back to Top
Supplementary Data
• Following up on the first volume in the series, introduces a new approach to the design, construction, and installation of flexible pipes, adding risers and umbilicals

• Presents both the theory and practical applications of flexible pipes with a view toward its use in pipelines and other industrial settings

• Describes the new materials, technologies, and practical applications of flexible pipelines, risers, and umbilicals, one of the hottest topics in the oil and gas industry

• Introduces engineering students to a profound theory for stronger and more efficient designs in pipelines and provides the veteran engineer a valuable reference


Author / Editor Details
Yong Bai, PhD, is the president of Offshore Pipelines & Risers Inc. in Houston, and is a professor and the director of the Offshore Engineering Research Center at Zhejiang University. He has previously taught at Stavanger University in Norway where he was a professor of offshore structure and has also worked with ABS as manager of the Offshore Technology Department, DNV as the JIP project manager and has also worked for Shell International E & P, JP Kenny, and MCS, where he was vice president of engineering. His the co-author of two books on pipelines and over 100 papers on the design and installation of subsea pipelines and risers.

Back to Top

Table of Contents
Preface xix
Acknowledgment xxi
About the Author xxiii
Part 1: Local Analysis 1
1 Introduction 3
1.1 Flexible Pipelines Overview 3
1.2 Environmental Conditions 4
1.3 Flexible Pipeline Geometry 7
1.4 Base Case-Failure Modes and Design Criteria 9
1.5 Reinforcements 10
1.6 Project and Objectives 12
References 12
2 Structural Design of Flexible Pipes in Different Water Depth 15
2.1 Introduction 15
2.2 Theoretical Models 15
2.3 Comparison and Discussion 24
2.4 Conclusions 34
References 34
3 Structural Design of High Pressure Flexible Pipes
of Different Internal Diameter 35
3.1 Introduction References 35
3.2 Analytical Models 37
3.2.1 Cylindrical Layers 37
3.2.2 Helix Layers 39
3.2.3 The Stiffness Matrix of Pipe as a Whole Helix Layers 40
3.2.4 Blasting Failure Criterion 43
3.3 FEA Modeling Description 43
3.4 Result and Discussion 46
3.5 Design 50
3.6 Conclusions 54
References 55
4 Tensile Behavior of Flexible Pipes 57
4.1 Introduction 57
4.2 Theoretical Models 57
4.2.1 Mechanical Model of Pressure Armor Layer 57
4.2.2 Mechanical Behavior of Tensile Armor Layer 61
4.2.3 Overall Mechanical Behavior 63
4.3 Numerical Model 64
4.3.1 Pressure Armor Stiffness 64
4.3.2 Full Pipe 69
4.4 Comparison and Discussion 71
4.5 Parametric Study 77
4.6 Conclusions 79
References 80
5 Design Case Study for Deep Water Risers 83
5.1 Abstract 83
5.2 Introduction 83
5.3 Cross-Sectional Design 85
5.4 Case Study 87
5.5 Design Result 94
5.6 Finite Elements Analysis 97
5.7 Conclusion 100
References 101
6 Unbonded Flexible Pipe Under Bending 103
6.1 Introduction 103
6.2 Helical Layer Within No-Slip Range 104
6.2.1 Geometry of Helical Layer 104
6.2.2 Bending Stiffness of Helical Layer 108
6.3 Helical Layer Within Slip Range 109
6.3.1 Critical Curvature 109
6.3.2 Axial Force in Helical Wire Within Slip Range 111
6.3.3 Axial Force in Helical Wire Within No-Slip Range 112
6.3.4 Bending Stiffness of Helical Layer 114
References 115
7 Coiling of Flexible Pipes 117
7.1 Introduction 117
7.2 Local Analysis 120
7.2.1 Dimensions and Material Characteristics 120
7.2.2 Tension Test 120
7.2.3 Bending Test 123
7.2.4 Summary 124
7.3 Global Analysis 126
7.3.1 Modeling 126
7.3.2 Interaction and Mesh 127
7.3.3 Load and Boundary Conditions 128
7.3.4 Discussion of the Results 128
7.4 Parametric Study 134
7.4.1 Diameter of the Coiling Drum 134
7.4.2 Sinking Distance of the Coiling Drum 135
7.4.3 Reeling Length 138
7.4.4 The Location of the Bearing Plate 139
7.5 Conclusions 142
References 143
Part 2: Riser Engineering 145
8 Flexible Risers and Flowlines 147
8.1 Introduction 147
8.2 Flexible Pipe Cross-Section 147
8.2.1 Carcass 149
8.2.2 Internal Polymer Sheath 150
8.2.3 Pressure Armor 150
8.2.4 Tensile Armor 151
8.2.5 External Polymer Sheath 151
8.2.6 Other Layers and Configurations 152
8.3 End Fitting and Annulus Venting Design 152
8.3.1 End Fitting Design and Top Stiffener (or Bellmouth) 152
8.3.2 Annulus Venting System 153
8.4 Flexible Riser Design 154
8.4.1 Design Analysis 154
8.4.2 Riser System Interface Design 155
8.4.3 Current Design Limitations 156
References 158
9 Lazy-Wave Static Analysis 159
9.1 Introduction 159
9.2 Fundamental Assumptions 162
9.3 Configuration Calculation 162
9.3.1 Cable Segment 163
9.3.1.1 Hang-Off Section 163
9.3.1.2 Buoyancy Section 166
9.3.1.3 Decline Section 166
9.3.2 Boundary-Layer Segment 167
9.3.3 Touchdown Segment 168
9.3.4 Boundary Conditions 170
9.4 Numerical Solution 171
9.5 Finite Element Model 174
9.5.1 Environment 175
9.5.2 Riser 175
9.5.3 Boundary Conditions 175
9.6 Comparison and Discussion 175
9.7 Parameter Analysis 180
9.7.1 Effect of Seabed Stiffness 180
9.7.2 Effect of Hang-Off Inclination Angle 182
9.7.3 Effect of Buoyancy Section Length 185
9.8 Conclusions 187
References 188
10 Steep-Wave Static Configuration 189
10.1 Introduction 189
10.2 Configuration Calculation 190
10.2.1 Touch-Down Segment 191
10.2.2 Buoyancy Segment 194
10.2.3 Hang-Off Segment 195
10.2.4 Boundary Conditions 195
10.3 Numerical Solution 196
10.4 Comparison and Discussion 198
10.5 Parametric Analysis 203
10.5.1 Effect of Buoyancy Segment’s Equivalent
Outer Diameter 203
10.5.2 Effect of Buoyancy Segment Length 205
10.5.3 Effect of Buoyancy Segment Location 207
10.5.4 Effect of Current Velocity 209
10.6 Conclusions 212
References 212
11 3D Rod Theory for Static and Dynamic Analysis 213
11.1 Introduction 213
11.2 Nomenclature 215
11.3 Mathematical Model 216
11.3.1 Governing Equations 216
11.3.2 Bending Hysteretic Behavior 220
11.3.3 Bend Stiffener Constraint 222
11.3.4 Pipe-Soil Interaction 224
11.4 Case Study 225
11.5 Results and Discussion 227
11.5.1 Static Analysis 227
11.5.2 Dynamic Analysis 231
11.5.2.1 Top-End Region 231
11.5.2.2 Touchdown Zone 233
11.5.3 Effect of Bend Stiffener Constraint 236
11.5.4 Effect of Bending Hysteretic Behavior 238
11.5.5 Effect of Top Angle Constraint 240
11.6 Conclusions 242
References 243
12 Dynamic Analysis of the Cable-Body of the Deep Underwater
Towed System 247
12.1 Introduction 247
12.2 Establishment of Towed System Dynamic Model 248
12.3 Numerical Simulation and Analysis of Calculation Results 252
12.3.1 The Effect of Different Turning Radius 252
12.3.2 The Effect of Different Turning Speeds 253
12.3.3 Dynamic Analysis of the Towed System
with the Change of the Parameters of the Cable 255
12.3.4 The Effect of the Diameters of the Towed Cable 257
12.3.5 The Effect of the Drag Coefficients
of the Towed Cable 258
12.3.6 The Effect of the Added Mass Coefficient
of the Towed Cable 261
12.4 Conclusions 263
Acknowledgments 264
References 264
13 Dynamic Analysis of Umbilical Cable Under Interference 267
13.1 Introduction 267
13.2 Dynamic Model of Umbilical Cable 269
13.2.1 Establishment of Mathematical Model 269
13.2.2 The Discrete Numerical Method for Solving
the Lumped Mass Method 271
13.2.3 Calculation of the Clashing Force
of Umbilical Cable 277
13.3 The Establishment of Dynamic Simulation
Model in OrcaFlex 279
13.3.1 The Equivalent Calculation of the Stiffness
of the Umbilical Cable 279
13.3.2 RAO of the Platform 281
13.3.3 The Choice of Wave Theory 281
13.3.4 Establishment of Model in OrcaFlex 282
13.4 The Calculation Results 283
13.4.1 The Clashing Force of Interference 283
13.4.2 The Variation of the Effective Tension
Under Interference 285
13.4.3 The Variation of Bending Under Interference 287
13.5 Conclusion 291
References 294
14 Fatigue Analysis of Flexible Riser 295
14.1 Introduction 295
14.2 Fatigue Failure Mode of Flexible Riser 296
14.3 Global Model of Flexible Risers 297
14.3.1 Pipe Element 297
14.3.2 Bending Stiffener 298
14.3.3 Sea Condition 299
14.3.4 Platform Motion Response 300
14.3.5 Time Domain Simulation Analysis 301
14.4 Failure Mode and Design Criteria 302
14.4.1 Axisymmetric Load Model 302
14.4.2 Bending Load Model 303
14.5 Calculation Method of Fatigue Life
of Flexible Riser 305
14.5.1 Rainflow Counting Method 305
14.5.2 S-N Curve 305
14.5.3 Miner’s Linear Cumulative Damage Theory 307
14.5.4 Modification of Average Stress on Fatigue Damage 308
14.6 Example of Fatigue Life Analysis of Flexible Riser 309
References 314
15 Steel Tube Umbilical and Control Systems 317
15.1 Introduction 317
15.1.1 General 317
15.1.2 Feasibility Study 318
15.1.3 Detailed Design and Installation 319
15.1.4 Qualification Tests 320
15.2 Control Systems 320
15.2.1 General 320
15.2.2 Control Systems 321
15.2.3 Elements of Control System 322
15.2.4 Umbilical Technological Challenges and Solutions 323
15.3 Cross-Sectional Design of the Umbilical 326
15.4 Steel Tube Design Capacity Verification 327
15.4.1 Pressure Containment 328
15.4.2 Allowable Bending Radius 328
15.5 Extreme Wave Analysis 329
15.6 Manufacturing Fatigue Analysis 330
15.6.1 Accumulated Plastic Strain 330
15.6.2 Low Cycle Fatigue 331
15.7 In-Place Fatigue Analysis 331
15.7.1 Selection of Sea State Data From Wave Scatter
Diagram 332
15.7.2 Analysis of Finite Element Static Model 332
15.8 Installation Analysis 332
15.9 Required On-Seabed Length for Stability 333
References 334
16 Stress and Fatigue of Umbilicals 337
16.1 Introduction 337
16.2 STU Fatigue Models 338
16.2.1 Simplified Model 339
16.2.1.1 Axial and Bending Stresses 339
16.2.1.2 Friction Stress 340
16.2.1.3 Simplified Approach: Combining
Stresses 342
16.2.1.4 Simplified (Combining Stresses)
Fatigue Damage 342
16.2.1.5 Simplified Model Assumptions 343
16.2.2 Enhanced Non-Linear Time Domain
Fatigue Model 343
16.2.2.1 Friction Stresses 344
16.2.2.2 Effect of Multiple Tube Layers 344
16.2.2.3 Combined Friction Stresses 345
16.2.2.4 Axial and Bending Stresses 345
16.2.2.5 Combining Stresses 346
16.2.2.6 Fatigue Life 346
16.2.2.7 Benefits of Enhanced Non-Linear Time
Domain Fatigue Model 347
16.3 Worked Example 348
16.3.1 Time Domain vs. Simplified Approaches 350
16.3.2 Effect of Friction on STU Fatigue 351
16.3.2.1 Influence of High Tube Friction on
Umbilical Fatigue 352
16.3.2.2 Influence of Low Tube Friction on
Umbilical Fatigue 352
16.3.2.3 Influence of Metal-to-Metal Friction vs.
Metal-to-Plastic Contact on Umbilical
Fatigue 352
16.3.3 Effect of Increasing Water Depth 353
16.3.4 Effect of Increasing the Tube Layer Radius 354
16.4 Conclusions 355
16.5 Recommendations 356
References 357
17 Cross-Sectional Stiffness for Umbilicals 359
17.1 Introduction 359
17.2 Theoretical Model of Umbilicals 361
17.3 Bending Stiffness of Umbilicals 362
17.4 Tensile Stiffness of Umbilicals 366
17.5 Torsional Stiffness of Umbilicals 368
17.6 Ultimate Capacity of Umbilicals 368
17.6.1 Minimum Bending Curvature 368
17.6.2 Minimum Tensile Load 369
17.6.3 Tensile Capacity Curve 369
References 372
18 Umbilical Cross-Section Design 375
18.1 Introduction 375
18.1.1 General 375
18.1.2 Sectional Composition of the Umbilical Cable 375
18.1.3 Umbilical Cable Structure Features 376
18.2 Umbilicals Cross-Section Design Overview 377
18.2.1 Umbilical Cross-Section Design Flowchart 377
18.2.2 Load Analysis 378
18.3 Umbilical Cable Cross-Section Design 380
18.3.1 Umbilical Cable Cross-Section Layout Design 380
18.3.2 Tensile Performance Design 381
18.3.3 Bending Performance Design 382
References 383
PART 3: Fiber Glass Reinforced Deep
Water Risers 385
19 Collapse Strength of Fiber Glass Reinforced Riser 387
19.1 Introduction 387
19.2 External Pressure Test 388
19.2.1 Testing Specimen 388
19.2.2 Testing System 389
19.2.3 Testing Results 389
19.3 Theoretical Analysis 390
19.3.1 Fundamental Assumptions 390
19.3.2 Constitutive Model of Materials 391
19.3.3 Establish the Equations of Motion 393
19.3.4 Establish Virtual Work Equations 394
19.4 Numerical Analysis 394
19.5 Finite Element Analysis 395
19.5.1 Establish the Finite Element Model 396
19.5.2 The Results of the Finite Element Analysis 397
19.6 Conclusion 401
References 402
20 Burst Strength of Fiber Glass Reinforced Riser 405
20.1 Introduction 405
20.2 Experiment 406
20.2.1 Dimensions and Material Properties of FGRFP 406
20.2.2 Experiment Device 407
20.2.3 Experiment Results 407
20.3 Numerical Simulations 407
20.3.1 Mesh and Interaction 407
20.3.2 Load and Boundary Conditions 408
20.3.3 Numerical Results 409
20.4 Analytical Solution 409
20.4.1 Basic Assumptions 409
20.4.2 Stress Analysis 411
20.4.3 Boundary Condition 414
20.5 Results and Discussion 416
20.6 Parametric Analysis 417
20.6.1 Winding Angle of Fiber Glass 417
20.6.2 Diameter-Thickness Ratio 418
20.7 Conclusions 419
References 419
21 Structural Analysis of Fiberglass Reinforced Bonded Flexible
Pipe Subjected to Tension 421
21.1 Introduction 421
21.2 Experiment 423
21.2.1 Basic Assumptions 423
21.2.2 Material Characteristics 425
21.2.3 Experimental Results 426
21.3 Theoretical Solution 427
21.3.1 Basic Assumptions 429
21.3.2 Cross-Section Simplification 429
21.3.3 Fiber Deformation 430
21.3.4 Cross-Section Deformation 431
21.3.5 Equilibrium Equations 434
21.4 Finite Element Model 434
21.5 Comparison and Discussion 436
21.5.1 Tension-Extension Relation 436
21.5.2 Cross-Section Deformation 437
21.5.3 Fiberglass Stress 439
21.5.4 Contribution of Each Material 439
21.5.5 Summary 440
21.6 Parametric Study 442
21.6.1 Winding Angle 442
21.6.2 Fiberglass Amount 443
21.6.3 Diameter-Thickness Ratio 444
21.7 Conclusions 445
Acknowledgement 446
References 446
22 Fiberglass Reinforced Flexible Pipes Under Bending 449
22.1 Introduction 449
22.2 Experiment 451
22.2.1 Experimental Facility 451
22.2.2 Specimen 453
22.2.3 Experiment Process 453
22.2.4 Experimental Results 455
22.3 Analytical Solution 456
22.3.1 Fundamental Assumption 456
22.3.2 Kinematic Equation 456
22.3.3 Material Simplification 459
22.3.4 Constitutive Model 462
22.3.5 Principle of Virtual Work 464
22.3.6 Algorithm of Analytical Solutions 465
22.4 Finite Element Method 465
22.5 Result and Conclusion 467
22.6 Parametric Analysis 470
22.6.1 D/t Ratio 470
22.6.2 Initial Ovality 470
22.7 Conclusions 470
References 473
23 Fiberglass Reinforced Flexible Pipes Under Torsion 475
23.1 Introduction 475
23.2 Experiments 477
23.3 Experimental Results 478
23.4 Analytical Solution 481
23.4.1 Coordinate Systems 481
23.4.2 Elastic Constants of Reinforced Layers
(k = 2, 3 … (n − 1)) 483
23.4.3 Reinforced Layers Stiffness Matrix (k = 2, 3 (n – 1)) 484
23.4.4 Inner Layer and Outer Layer Stiffness Matrix
(k = 1, n) 486
23.4.5 Stress and Deformation Analysis 487
23.4.6 Boundary Conditions 491
23.4.7 Interface Conditions 492
23.4.8 Geometric Nonlinearity 493
23.5 Numerical Simulations 494
23.6 Results and Discussions 496
23.7 Parametric Analysis 498
23.7.1 Effect of Winding Angle 498
23.7.2 Effect of Thickness of Reinforced Layers 498
23.8 Conclusions 499
Acknowledgments 500
References 501
24 Cross-Section Design of Fiberglass Reinforced Riser 503
24.1 Introduction 503
24.2 Nomenclature 503
24.3 Basic Structure of Pipe 505
24.3.1 Overall Structure 505
24.3.2 Material 506
24.4 Strength Failure Design Criteria 506
24.4.1 Burst Pressure 506
24.4.2 Burst Pressure Under Internal Pressure Bending
Moment 508
24.4.3 Yield Tension 508
24.5 Failure Criteria for Instability Design 510
24.5.1 Minimum Bending Radius 510
24.5.2 External Pressure Instability Pressure 510
24.6 Design Criteria for Leakage Failure 511
References 511
25 Fatigue Life Assessment of Fiberglass Reinforced
Flexible Pipes 513
25.1 Introduction 513
25.2 Global Analysis 515
25.3 Rain Flow Method 517
25.4 Local Analysis 519
25.5 Modeling 519
25.6 Result Discussion 520
25.7 Sensitivity Analysis 524
25.8 Fatigue Life Assessment 527
25.9 Conclusion 528
References 529
PART 4: Ancillary Equipments for Flexibles
and Umbilicals 531
26 Typical Connector Design for Risers 533
26.1 Introduction 533
26.2 Carcass 534
26.3 Typical Connector 535
26.4 Seal System 536
26.5 Termination of the Carcass 537
26.6 Smooth Bore Pipe 539
26.7 Rough Bore Pipe 540
26.8 Discussion 542
26.9 Conclusions 544
References 545
27 Bend Stiffener and Restrictor Design 547
27.1 Introduction 547
27.2 Response Model 548
27.3 Extreme Load Description 549
27.4 General Optimization Scheme 550
27.5 Application Example 552
27.6 Non-Dimensional Bend Stiffener Design 553
27.7 Alternative Non-Dimensional Parameters 556
27.8 Conclusions 558
References 558
28 End Termination Design for Umbilicals 561
28.1 Introduction 561
28.2 Umbilical Termination Assembly 561
28.2.1 General 561
28.2.2 UTA Design 562
28.2.3 UTA Structural Design Basis 565
28.3 Subsea Termination Interface 566
References 568

Back to Top


BISAC SUBJECT HEADINGS
TEC047000 : TECHNOLOGY & ENGINEERING / Petroleum
SCI024000 : SCIENCE / Energy
BUS070040 : BUSINESS & ECONOMICS / Industries / Energy
 
BIC CODES
THF: Fossil fuel technologies
TNC: Structural engineering
TTSH: Offshore engineering

Back to Top


Description
BISAC & BIC Codes
Author/Editor Details
Table of Contents
Bookmark this page